Android Based Volleyball Passing Test Instrument Development Design
Abstract
This study aims to see how the design or design of an android-based volleyball passing test instrument. This study uses the Research and Development (R n d) method using the ADDIE model. The ADDIE model is the Analysis phase, Design phase, Development phase, Implementation phase and Evaluation Phase. This research was carried out on July 17-20 September 2022. This research is only at the design stage, where at this design stage it only displays concepts that are made systematically with the intention of making the product to be developed. The results of this study are where the product is designed using a fitting test tool made with a laser and sensor installed in the test area then Arduino Mega as the brain or input and output controller of a circuit then added with NodeMCU can be used as a data sender so that it can be sent to the application that has been made. and downloaded on an Android-based cellphone, which was created with the help of the internet. Based on this design, it is hoped that it can be continued at the stage of developing an Android-based test instrument. This research is used as the basis for developing an android-based volleyball passing test instrument.
References
Abdullah, S. K. (2019). Remote Heart Rate Monitor System using NodeMcu Microcontroller and easy pulse sensor v1.1. IOP Conference Series: Materials Science and Engineering, 518(5). https://doi.org/10.1088/1757-899X/518/5/052016
Aditya Gumantan. (2020). Pengembangan Aplikasi Pengukuran Tes kebugaran Jasmani Berbasis Android. Jurnal Ilmu Keolahragaan, 19(2), 196–205. https://doi.org/https://doi.org/10.24114/jik.v19i2.21828
Al Azka, H. H., Setyawati, R. D., & Albab, I. U. (2019). Pengembangan Modul Pembelajaran. Imajiner: Jurnal Matematika Dan Pendidikan Matematika, 1(5), 224–236. https://doi.org/10.26877/imajiner.v1i5.4473
Cahyadi, R. A. H. (2019). Pengembangan Bahan Ajar Berbasis Addie Model. Halaqa: Islamic Education Journal, 3(1), 35–42. https://doi.org/10.21070/halaqa.v3i1.2124
Dewi, R., & Daulay, B. (2020). Development of Digital-Based Volleyball Passing Test Instruments. JURNAL PRESTASI, 4(1), 9–16. https://doi.org/https://doi.org/10.24114/jp.v4i1.16821
Giartama Giartama, Destriani Destriani, Waluyo Waluyo, M. M. (2020). Efektivitas alat tes servis bolavoli berbasis mikrokontroller. Jurnal SPORTIF : Jurnal Penelitian Pembelajaran, 6(2), 499–513. https://doi.org/https://doi.org/10.29407/js_unpgri.v6i2.14492
Guntur, Sukadiyanto, D. M. (2014). Jurnal Penelitian dan Evaluasi Pendidikan. Jurnal Penelitian Dan Evaluasi Pendidikan, 18(1), 13–29. https://doi.org/https://doi.org/10.21831/pep.v18i1.2121
Hasnul Haris. (2021). Pengembangan Instrumen Tes Passing Bola Voli Berbasis Smartphone. Universitas Negeri Medan.
Ilham, Muhamad, Oktafiranda, D. (2019). PENGEMBANGAN BAHAN AJAR MATA KULIAH TEORI DAN PRAKTIK BOLAVOLI BERBASIS E-LEARNING. 1, 89–96. https://doi.org/https://doi.org/10.21009/segar/0902/04
Indrakasih, Sinulingga, A., Lumbaraja, F., & Pasaribu, A. M. N. (2022). Development of test forms of down passing techniques in sensor-based volleyball games. Journal Sport Area, 7(2), 300–309. https://doi.org/10.25299/sportarea.2022.vol7(2).9012
Jalil, A. M. A., Mohamad, R., Anas, N. M., Kassim, M., & Suliman, S. I. (2021). Implementation of vehicle ventilation system using nodemcu ESP8266 for remote monitoring. Bulletin of Electrical Engineering and Informatics, 10(1), 327–336. https://doi.org/10.11591/eei.v10i1.2669
Kavitha BC, Vallikannu R, and S. K. (2020). Delay-aware concurrent data management method for IoT collaborative mobile edge computing environment. Microprocessors and Microsystems, 74(April). https://doi.org/https://doi.org/10.1016/j.micpro.2020.103021
Kurnia, T. D., Lati, C., Fauziah, H., & Trihanton, A. (2019). Model ADDIE Untuk Pengembangan Bahan Ajar Berbasis KemampuanM Pemecahan Masalah Berbantuan 3D Pageflip. Seminar Nasional Pendidikan Matematika, 1(1), 516–525. http://www.fkip-unswagati.ac.id/ejournal/index.php/snpm/article/view/844
Mu’arifuddin, M. A. (2018). Kelayakan Aspek Materi dan Media dalam Pengembangan Bahan Ajar Bola Voli Berbasis Kontekstual. JOSSAE : Journal of Sport Science and Education, 3(1), 12. https://doi.org/10.26740/jossae.v3n1.p12-15
Mubashir Ali, Nosheen Kanwal, Aamir Hussain, Fouzia Samiullah, Aqsa Iftikhar, M. Q. (2020). IoT based smart garden monitoring system using NodeMCU microcontroller. International Journal of ADVANCED AND APPLIED SCIENCES, 7(8), 117–124. https://doi.org/10.21833/ijaas.2020.08.012
Node MCU. (2019). NodeMcu Connect Things EASY. https://bit.ly/2UbON2g
Rohendi, A. (2019). Development of Passing Learning Model to Based Games Volley Ball. OURNAL OF PHYSICAL AND OUTDOOR EDUCATION, 1(1), 1–12.
Samuel Purba, Zulfan Heri, R. H. (2020). PENGEMBANGAN ALAT INSTRUMEN BLEP TEST DENGAN MENGGUNAKANSENSORLASERBERBASIS MIKROKONTROLER. Jurnal Ilmu Keolahragaan, 19(2), 188–195. https://doi.org/https://doi.org/10.24114/jik.v19i2.32834
Septiani, S., & Puspita Sari, Y. (2021). Pengembangan Model Latihan Smash Bola Voli. Edukasimu.Org, 1(3), 2021–2022.
Trianto. (2012). Model Pengembangan Terpadu. Jakarta: Bumi Aksara.
Vai, A., Jawak, J. F., Wijayanti, N. P. N., & Gusdernawati, A. (2021). Pengembangan media pembelajaran teknik passing bawah menggunakan media gambar dalam pada permainan bola voli di smp santa veronika. Journal of Sport Education (JOPE), 3(2), 127. https://doi.org/10.31258/jope.3.2.127-136
Copyright (c) 2023 Jp.jok (Jurnal Pendidikan Jasmani, Olahraga dan Kesehatan)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.